Skip to main content

Windows 8 L2TP/IPsec Client Configuration

1.1. Open Control panel and select Network and Sharing center.

https://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-13.png

 


 

2.2. Choose Set up a new connection or network option.

 

https://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-14.pnghttps://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-14.png

 

 


3.3. Choose Connect to a workplace option and click Next.

 

https://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-15.pnghttps://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-15.png

 

 


4.4. Click Use my Internet connection (VPN) option.

 

https://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-16.pnghttps://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-16.png

 


 

5.5. Enter IP address of ASA's WAN interface or FQDN and any name for VPN adapter which is locally significant and click Create.

 

https://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-17.pnghttps://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-17.png

 


 

6.6. On Network and Sharing Center, choose Change adapter settings option on the left pane of the window.

 

https://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-18.pnghttps://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-18.png

 


 

7.7. Right click the recently created adapterfor L2TP VPN and choose Properties.

 

https://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-19.pnghttps://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-19.png

 


 

8.8. Navigate to Security tab, choose the Type of VPN as Layer 2 Tunneling Protocol with IPsec (L2TP/IPsec) and then click on Advanced settings.

 

https://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-20.pnghttps://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-20.png

 


 

9.9. Enter the preshared key as the same mentioned in tunnel-group DefaultRAGroup and click OK. In this example, C!sc0@123 is used as the pre-shared key.

https://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-21.png

 

 


10. Choose the authentication method as Allow these protocols and ensure that only 
"
Microsoft CHAP Version 2 (MS-CHAP v2) checkbox is checked and click OK.

 

https://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-22.png

 

 


11.11. Under network connections, right click on L2TP VPN adapter and choose Connect/Disconnect.

 

https://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-23.pnghttps://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-23.png

 

 

12. Networks icon will pop up and click Connect on L2TP VPN connection.

https://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-24.pnghttps://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-24.png

 

 


13. Enter the user credentials and click OK.

 

 

13. Enter the user credentials and click OK.

https://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-25.pnghttps://www.cisco.com/c/dam/en/us/support/docs/ip/layer-two-tunnel-protocol-l2tp/200340-Configure-L2TP-Over-IPsec-Between-Window-25.png