Windows 8 L2TP/IPsec Client Configuration

1. Open Control panel and select Network and Sharing center.

 

---

2. Choose Set up a new connection or network option.

 

 

 

---

3. Choose Connect to a workplace option and click Next.

 

---

4. Click Use my Internet connection (VPN) option.

 

 

---

 

5. Enter IP address of ASA's WAN interface or FQDN and any name for VPN adapter which is locally significant and click Create.

 

 

---

 

6. On Network and Sharing Center, choose Change adapter settings option on the left pane of the window.

 

 

---

 

7. Right click the recently created adapterfor L2TP VPN and choose Properties.

 

 

---

 

8. Navigate to Security tab, choose the Type of VPN as Layer 2 Tunneling Protocol with IPsec (L2TP/IPsec) and then click on Advanced settings.

 

 

---

 

9. Enter the preshared key as the same mentioned in tunnel-group DefaultRAGroup and click OK. In this example, C!sc0@123 is used as the pre-shared key.

 

---

10. Choose the authentication method as Allow these protocols and ensure that only
"Microsoft CHAP Version 2 (MS-CHAP v2) checkbox is checked and click OK.

 

 

---

11. Under network connections, right click on L2TP VPN adapter and choose Connect/Disconnect.

 

 

 

---

12. Networks icon will pop up and click Connect on L2TP VPN connection.

 

 

 

---

13. Enter the user credentials and click OK.